Office Telephone Equipment
 Foneco BSI Telephone Systems - Your Connection To The World
Nortel Norstar Telephone Systems   

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316
the right 2 buttons under the display are "NEXT" and "SHOW" respectively.

  1.    To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
  2.    Enter password (default = 266344) - display should read "Terminals & Sets"
  3.    Press "NEXT" 5 times - display should read "Time and Date"
  4.    Press "SHOW" - display should read "Hour:___"
  5.    Press softkey "CHANGE"
  6.    Enter hour - display should read "AM OK or Change"
  7.    Select AM or PM
  8.    Press "NEXT" - display should read "Minutes:___"
  9.    Press softkey "CHANGE"
10.    Enter minutes
11.    Press "NEXT" - display should read "Year:___"
12.    Press softkey "CHANGE"
13.    Enter year
14.    Press "NEXT" - display should read "Month:___"
15.    Press softkey "CHANGE"
16.    Enter month
17.    Press "NEXT" - display should read "Day:___"
18.    Press softkey "CHANGE"
19.    Enter day
20.    Press "NEXT"

The above procedure is the manufacturer's recommended method for changing time and date.   Foneco Business Systems
cannot be held responsible for failures in function or equipment that result from user programming errors.   Any
repairs needed to correct such failures in hardware and/or software will be performed at our regular rate.

 About Us 
 Contact Us 
 Site Map 

© Copyright 2000-2007 by Foneco BSI.   All rights Reserved